Etcd Backup and Restore Controllers

Overview

Starting with version v2.17, KKP introduced experimental support for new etcd Backup and Restore controller based on the etcd-launcher experimental feature.

Since 2.18, the feature is not experimental anymore

The legacy backup controller is based on a simple cron job and didn’t support automated restore operations. The new experimental controllers utilize new CRDs for backups and restore, support multiple backup configurations per cluster, immediate backups and automated restore operations.

The new controllers try to be as backward compatible as possible with the legacy controller. However, it’s not possible to manage or restore legacy backups with the new controllers.

The new controllers manage backup, restore and cleanup operations using Kubernetes Jobs. All jobs triggered use containers that can be passed to the seed controller manager similar to the legacy backup controller.

Currently, only S3 compatible backup backends are supported.

Enabling The New controllers

To use the new backup/restore controller, the etcd-launcher feature must be enabled along with specifically enabling the controllers by passing the flag --enable-etcd-backups-restores to the seed controller manager. This can be achieved for a Seed by KPP admins through configuring backup destinations for a Seed. As soon as there is at least one backup destination set, the feature is enabled. More info on that here Etcd Backup Destination Settings.

Backup and Delete Containers

The new backup controller uses 2 default jobs to for storing backups and deleting them. If needed, it is possible to configure custom jobs in the KubermaticConfiguration.

Store job container(backupStoreContainer)

name: store-container
image: d3fk/s3cmd@sha256:2061883abbf0ebcf0ea3d5d218558c9c229f212e9c08af4acdaa3758980eb67a
command:
- /bin/sh
- -c
- |
  set -e
  s3cmd \
    --ca-certs=/etc/ca-bundle/ca-bundle.pem \
    --access_key=$ACCESS_KEY_ID \
    --secret_key=$SECRET_ACCESS_KEY \
    --host=$ENDPOINT \
    --host-bucket='%(bucket).'$ENDPOINT \
    put /backup/snapshot.db s3://$BUCKET_NAME/$CLUSTER-$BACKUP_TO_CREATE  
volumeMounts:
- name: etcd-backup
  mountPath: /backup

Delete job container(backupDeleteContainer)

name: delete-container
image: d3fk/s3cmd@sha256:2061883abbf0ebcf0ea3d5d218558c9c229f212e9c08af4acdaa3758980eb67a
command:
- /bin/sh
- -c
- |
  s3cmd \
    --ca-certs=/etc/ca-bundle/ca-bundle.pem \
    --access_key=$ACCESS_KEY_ID \
    --secret_key=$SECRET_ACCESS_KEY \
    --host=$ENDPOINT \
    --host-bucket='%(bucket).'$ENDPOINT \
    del s3://$BUCKET_NAME/$CLUSTER-$BACKUP_TO_DELETE
  case $? in
  12)
    # backup no longer exists, which is fine
    exit 0
    ;;
  0)
    exit 0
    ;;
  *)
    exit $?
    ;;
  esac  

S3 Credentials and Settings

The new controllers will use the credentials setup in the Seed Backup destinations, depending on the destination used.

Creating Backups

To create an automatic backup, simply create a backup configuration resource. Or use the UI as shown here Etcd Backup Management.

apiVersion: kubermatic.k8c.io/v1
kind: EtcdBackupConfig
metadata:
  name: daily-backup
  namespace: cluster-zvc78xnnz7
spec:
  cluster:
    apiVersion: kubermatic.k8c.io/v1
    kind: Cluster
    name: zvc78xnnz7
  schedule: '0 1 * * *'
  keep: 40
  destination: s3

Once created, the controller will start a new backup every time the schedule demands it (i.e. at 1:00 AM in the example), and delete backups once more than .spec.keep (40 in the example) have been created. The created backups are named based on the configuration name and the backup timestamp $backupconfigname-$timestamp. The backup is stored at the specified backup destination, which is configured per seed.

Backup creations and deletions are done by spawning Kubernetes jobs. For each backup, a job is created with an init container that creates a snapshot and a main container that will run the customizable store container. It will receive the cluster name and backup name in two environment variables. The store container should upload the snapshot to an S3 compatible backend and return exit code 0 if successful.

When a backup needs to be deleted, the controller starts another job with the delete container configured in the seed controller manager. The delete container receives the cluster and backup names in environment variables and must delete the backup at the place where it was uploaded by the create job earlier, and exit 0 if successful.

The controller maintains list of backups related to this configuration in the resource status spec, where it tracks the creation and deletion status of all backups that haven’t been successfully deleted yet.

One Time Backups - Snapshots

It’s also possible to trigger a one-time backup if needed. Simply by creating a backup configuration that doesn’t have a schedule set in the spec. The backup controller will immediately create a backup job for the user cluster and will not attempt to run it again or delete it later.

Listing Backups

The Backup controller tracks all backups related to each configuration in a list in the backup configuration resource status spec. The status spec shows details about the backup status, cleanup status and the jobs triggered to run it and clean it up:

status:
  lastBackups:
  - backupFinishedTime: "2021-03-16T01:48:22Z"
    backupName: zvc78xnnz7-jobtest1-2021-03-16T03:48:00
    backupPhase: Completed
    deleteFinishedTime: "2021-03-16T02:01:43Z"
    deleteJobName: zvc78xnnz7-backup-jobtest1-delete-s8sb8mdsp5
    deletePhase: Completed
    jobName: zvc78xnnz7-backup-jobtest1-create-rjjq9d4k6d
    scheduledTime: "2021-03-16T01:48:00Z"
  - backupFinishedTime: "2021-03-16T01:51:25Z"
    backupName: zvc78xnnz7-jobtest1-2021-03-16T03:51:00
    backupPhase: Completed
    deleteFinishedTime: "2021-03-16T02:04:08Z"
    deleteJobName: zvc78xnnz7-backup-jobtest1-delete-wcwvc8nmdt
    deletePhase: Completed
    jobName: zvc78xnnz7-backup-jobtest1-create-96tblznngk
    scheduledTime: "2021-03-16T01:51:00Z"
  - backupFinishedTime: "2021-03-16T01:54:21Z"
    backupName: zvc78xnnz7-jobtest1-2021-03-16T03:54:00
    backupPhase: Completed
    deleteFinishedTime: "2021-03-16T02:08:24Z"
    deleteJobName: zvc78xnnz7-backup-jobtest1-delete-cgmqhlw5fw
    deletePhase: Completed
    jobName: zvc78xnnz7-backup-jobtest1-create-v2gz2ntn46
    scheduledTime: "2021-03-16T01:54:00Z"

Restoring Backups

To restore a cluster from am existing backup, you simply create a restore resource in the cluster namespace:

apiVersion: kubermatic.k8c.io/v1
kind: EtcdRestore
metadata:
  name: cluster-restore
  namespace: cluster-zvc78xnnz7
spec:
  cluster:
    apiVersion: kubermatic.k8c.io/v1
    kind: Cluster
    name: zvc78xnnz7
  backupName: daily-backup-2021-03-02T15:24:00
  destination: s3

Once this resource is created, the controller will reconcile it and apply the following restore procedure:

• Pause the cluster.
• Delete the etcd Statefulset and Volumes.
• Set the EtcdClusterInitialized cluster condition to false.
• Unpause the cluster and wait until the cluster controller has recreated the etcd Statefulset.
• During the etcd Statefulset recreation, the etcd-launcher will detect the active restore resources and will download the backup from the S3 backend based on the credentials from the kube-system/s3-credentials secret and the information from the kube-system/s3-settings configmap.
• Once the backup is downloaded successfully, the etcd-launcher will restore the backup and restart the etcd ring.
• Once the etcd cluster is recovered and quorum is achieved, the EtcdClusterInitialized cluster condition to true.